yannickamet
Membre VIP
- Inscrit
- 7 Janvier 2013
- Messages
- 6 209
- Points
- 36
- #1
[Kernel]-[AOSP][KitKat] f4ktion 1.4.x [i9195]
[Kernel]-[AOSP][KitKat] f4ktion_1.5.0-eur_lte uniquement sous Android 4.4.4
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Avertissement : Cette opération comporte des risques. Ni moi ni Phonandroid ne peuvent être tenu responsables des éventuels problèmes rencontrés. Pensez à effectuer une sauvegarde avant d'installer ce Kernel
Je vous présente le nouveau Kernel f4ktion basé sur le noyau CM d'arco68 , ce Kernel est destiné aux roms AOSP et KitKat
Carartéristiques (source XDA)
Change log (source XDA)* Linux Kernel 3.4.91
* CPU Overclock (OC): 1836MHz / 1890MHz / 1944MHz / 1998MHz / 2052MHz frequency scaling steps
* CPU Underclock (UC): 378MHz / 270MHz / 162MHz frequency scaling steps
* CPU Voltage Control (VC) Use PerformanceControl
* GPU Overclock (GPU-OC): 504MHz / 545MHz / 600MHz frequency scaling steps
* GPU Underclock (GPU-UC): 487.5MHz / 320MHz / 192MHz frequency scaling steps
* Compiled with Linaro 4.9.1: Cortex A15 optimized toolchain by Christopher86
* Optimizations: Built with -O3 and many optimization flags
* Kernel mode NEON: Support for NEON instructions in kernel mode
* Arch_Power: arch-specific power sched features enabled
* Graphite optimizations: Graphite is a framework for high-level memory optimizations using the polyhedral model.
* LTO: Link Time Optimization.
* KSM: Kernel Same-page Merging enabled
* BLN: Support for BackLightNotification (Use BLN's app to configure)
* Sound Control: Faux123's GPL Sound Control 3.2 (Use FauxSound app to configure)
* USB Fastcharge: Faux123's fast_charger driver, allowing to set mV of the charger or USB port your device is plugged-in to
* F2FS Enabled: Support for F2FS (Flash-Friendly File System)
* Asynchronous Fsync: Asynchronous file sync
* Dynamic Fsync: Faux123's Dynamic File Sync v1.3
* Dynamic Management of Dirty Page Writebacks
* USB OTG support: USB On-The-Go support, you need a Y USB OTG cable
Additional Governors:
* Intelliactive
* Lionheart
* SmartASSV2
* SmartASSH3
* SmartMAX
* Wheatly
Additional I/O Schedulers:
* FIOPS (Fair Input/Output Per Second)
* SIO (SImple Ondemand)
* SIO Plus (SImple Ondemand Plus)
* V(R)
* ZEN
1.4.5 (08/06/2014)
- Some other minor changes, improvements.
- Updated ramdisks with some tweaks.
- Added support for moving app2sd
- Fixed FolderMount issue
- LTO enabled
- Graphite Optimization
- msm: slimbus: initial overclocking of slimbus
- bam_dmux: Use power efficient workqueues for delayed timeouts
- ext4: speed up truncate/unlink by not using bforget() unless needed
- msm: gpu: add optimizations cflags plus -O3 to drivers.
- F2FS support, kernel will auto-detect on boot your file system (f2fs or ext4)
- Set SELinux to permisive via cmdline.
- drivers: cpuidle: sync
- Synced with CM source
- Upstream Linux Kernel to 3.4.91
- Fix some warnings when compiling with gcc 4.8.x/4.9.x
- Makefile: add support for gcc 4.9.x
- kernel: Fix all leaks and cleanup
- Added Francisco Franco's Intereactive GPU governor.
- Pipe flag enabled
1.4.0 (08/05/2014)
- Build using Christopher Linaro Toolchain 4.9.1 (Cortex A15)
- msm: kgsl: added GPU Overclock/Underclock (OC up to 627MHz)
- writeback: fix race that cause writeback hung.
- cfg80211: fix memory leak
- Added support to FolderMount
- cpufreq: intelliactive: synced with latest changes.
- Upstream Linux Kernel to 3.4.89
- Updated ramdisks
- Synced with CM source.
1.2.3a (02/01/2014)
- Some tweaks on SAV2 and SAH3 to fit low clocks.
- Removed some warnings when compiling with Linaro toolchain
- Added another step on OC, up to 2.1 Ghz now
- Added fsync support (enabled by default)
- Added extra low clocks frequencys (324, 270, 216 and 162 MHz)
1.2.2 (29/12/2013)
- Quelques réglages à SmartASSV2 et SmartASSH3
- Mise à jour ramdisks
- Ajouté underclocker (UC) support
- Limiter la fréquence max de stocker au démarrage (1,728 GHz)
- Le support USB FastCharge
- Synchronisé avec la source de CM
- Mise à jour à la version 3.1 FauxSound (changements de volume s'applique désormais en temps réel)
1.1.5 (15/12/2013)
- Upstream kernel to Linux 3.4.50
- Synchronisé avec CM source
- Ajout JB/CM10.2 variants (Tested on latest 2013-12-02 20:19:59 official release)
- Ajout FauxSound (It's needs FauxSound Control app, unfortunately it's a paid app, but developers deserve it because they do a great job)
1.1.3 (13/12/2013)
- Added Simple I/O Scheduler
- Upstream kernel to Linux 3.4.40
- Updated ramdisk with latest cm changes
1.1.2 (12/12/2013)
- Added Lionheart CPU governor
- Added Lulzactive CPU governor
- Added SmartASSV2 CPU governor
- Synced with cm source
1.1.0 (11/12/2013)
- Added BLN (thanks to junkyde!)
- Upstream kernel to Linux 3.4.10
1.0.0 (07/12/2013)
- Initial release
- Setup build environment
- Some other minor changes, improvements.
- Updated ramdisks with some tweaks.
- Added support for moving app2sd
- Fixed FolderMount issue
- LTO enabled
- Graphite Optimization
- msm: slimbus: initial overclocking of slimbus
- bam_dmux: Use power efficient workqueues for delayed timeouts
- ext4: speed up truncate/unlink by not using bforget() unless needed
- msm: gpu: add optimizations cflags plus -O3 to drivers.
- F2FS support, kernel will auto-detect on boot your file system (f2fs or ext4)
- Set SELinux to permisive via cmdline.
- drivers: cpuidle: sync
- Synced with CM source
- Upstream Linux Kernel to 3.4.91
- Fix some warnings when compiling with gcc 4.8.x/4.9.x
- Makefile: add support for gcc 4.9.x
- kernel: Fix all leaks and cleanup
- Added Francisco Franco's Intereactive GPU governor.
- Pipe flag enabled
1.4.0 (08/05/2014)
- Build using Christopher Linaro Toolchain 4.9.1 (Cortex A15)
- msm: kgsl: added GPU Overclock/Underclock (OC up to 627MHz)
- writeback: fix race that cause writeback hung.
- cfg80211: fix memory leak
- Added support to FolderMount
- cpufreq: intelliactive: synced with latest changes.
- Upstream Linux Kernel to 3.4.89
- Updated ramdisks
- Synced with CM source.
1.2.3a (02/01/2014)
- Some tweaks on SAV2 and SAH3 to fit low clocks.
- Removed some warnings when compiling with Linaro toolchain
- Added another step on OC, up to 2.1 Ghz now
- Added fsync support (enabled by default)
- Added extra low clocks frequencys (324, 270, 216 and 162 MHz)
1.2.2 (29/12/2013)
- Quelques réglages à SmartASSV2 et SmartASSH3
- Mise à jour ramdisks
- Ajouté underclocker (UC) support
- Limiter la fréquence max de stocker au démarrage (1,728 GHz)
- Le support USB FastCharge
- Synchronisé avec la source de CM
- Mise à jour à la version 3.1 FauxSound (changements de volume s'applique désormais en temps réel)
1.1.5 (15/12/2013)
- Upstream kernel to Linux 3.4.50
- Synchronisé avec CM source
- Ajout JB/CM10.2 variants (Tested on latest 2013-12-02 20:19:59 official release)
- Ajout FauxSound (It's needs FauxSound Control app, unfortunately it's a paid app, but developers deserve it because they do a great job)
1.1.3 (13/12/2013)
- Added Simple I/O Scheduler
- Upstream kernel to Linux 3.4.40
- Updated ramdisk with latest cm changes
1.1.2 (12/12/2013)
- Added Lionheart CPU governor
- Added Lulzactive CPU governor
- Added SmartASSV2 CPU governor
- Synced with cm source
1.1.0 (11/12/2013)
- Added BLN (thanks to junkyde!)
- Upstream kernel to Linux 3.4.10
1.0.0 (07/12/2013)
- Initial release
- Setup build environment
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
uniquement pour Adroid 4.4.4
Un Samsung S4 mini i9195 rooté voir ICI ou ICI suivant la version de votre Modem (merci à DFMirouf et Darktitor)
1) Télécharger leKernel
2) Copier le fichier sur votre carte sd
3) Redémarrer en mode recovery (Volume Haut+Home+Power)
4) Choisir "install a zip from sdcard" :arrow: "choose a zip from sdcard" :arrow: sélectionner le kernel
5) Valider par "yes"
6) Patientez
7) Faire un wipe cache
8) Redemarrer
- F4k- arco68 (merci pour le support sur S4 Mini)
- Christopher83
- CM team
- junkyde
- ktoonsez
- proxuser
- Stratosk
J'attends vos retour :wink: (déjà testé par des utilisateurs d'i9195 sur XDA et très bon retour)
Le noyau de ce Kernel sera suivi et mis à jour..