L
letin69
Membre
- Inscrit
- 18 Juillet 2012
- Messages
- 331
- Points
- 16
- #1
Installer le Kernel custom Cocore-E / EP 8.2
Samsung Galaxy S Advance I9070 / I9070P
Samsung Galaxy S Advance I9070 / I9070P
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
: cocafeAvertissement : Cette opération comporte des risques. Phonandroid ne peut être tenu responsable des éventuels problèmes rencontrés. Pensez à effectuer une sauvegarde de votre ROM.
========================================================================================================
Cocore-E est un Kernel custom créé par Cocafe pour Jelly Bean.
N'installer surtout pas ce kernel sur une ROM Cyanogenmod ou basée sur CyanogenMod (comme P.A.C-MAN), cela résulterait a un soft-brick.
PRE-REQUIS
- Avoir un Samsung Galaxy S Advance I9070 ou I9070P tournant sous Jelly Bean 4.1.2
- Avoir le CWM Recovery temporaire de disponible sur MicroSD externe.
- Etre rooté
Télécharger Cocore-E (I9070):
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
-- S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
-- S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Télécharger Cocore-EP (I9070P) :
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
-- S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
-- S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
NOUVEAU : Le kernel Cocore-EP*******.zip a été spécialement conçu pour le I9070P, il supporte la NFC ! A ne pas flasher sur un I9070 !!
Le Cocore****CWM.zip inclut le Clock Word Mod Recovery 6.0.3.4
Le Cocore****CWM-Touch.zip inclut le Clock Word Mod Recovery TOUCH 6.0.3.3. C'est le même que celui du dessus sauf qu'il est tactile.
Le Cocore****TWRP.zip inclut le TWRP Recovery 2.6.1.0. C'est un recovery que je trouve meilleur, pour ma part, car il intègre plus de fonctions et a une bien meilleure interface graphique.
SCREENSHOTS
TWRP :
CWM Touch :
CWM :
INSTALLATION
1/ Placer le fichier téléchargé ci-dessus à la racine de la carte SD externe du téléphone
2/ Eteignez le téléphone et redémarrez-le en mode Recovery (VOLUME HAUT + HOME + POWER). Si vous avez déjà le CWM ou TWRP, passez à l'étape 4
3/ Séléctionnez install zip from external storage et choisissez le CWM Recovery temporaire, validez avec Yes
4/(Vous devriez maintenant être dans un autre Recovery) Séléctionnez install zip from sdcard, ensuite choose zip from sdcard (ou peut etre choose zip from external sdcard) et choisissez le kernel téléchargé dans le Pré-Requis, validez avec Yes.
5/ Faites reboot system now.
6/ Enjoy ! bigsmile
Ce kernel améliorera beaucoup la fluidité, les performances en jeu et l'autonomie de votre téléphone.[/b]
CPU Governors :
Code:
S'il vous plaît,
Connexion
ou
S'inscrire
to view codes content!
I/O Schedulers :
Code:
S'il vous plaît,
Connexion
ou
S'inscrire
to view codes content!
fs: CIFS module
fs: FSYNC control (Combined dyn fsync control)
fs: Mount noatime and nodiratime by defualt [franciscofranco]
fs/aio: Asynchronous io performance improved
mm: SLUB memory allocator
arm: ThumbEE supports
arm: Optimzed rwsem algorithm [ezekeel]
arm: Remove old version sha1 implementation
arm: CPU unaligned access path
arm/vfp: Build with neon
arm/crypto: ARM AES and SHA-1 crypto implementation
arm/topology: Linaro lastest patches
abb-Codec: ABBamp audio v2.4 (sound control)
abb-Regulator: VOTG power supply*
abb-Charger: Charger control
abb-Chargalg: Charge cycle control
abb-Chargalg: Real charged notification
abb-POnKey: PowerOn Key emulator
lib: Optimzed CRC32 algorithm [ezekeel]
lib: GNU C version memcpy
net: More choices of TCP congestions
net: Proportional Rate Reduction for TCP (PRR implementation)
mmc: SPI CRC can be disabled!
rcu: jRCU [Joe Korty]
swap: swap supports
zram: optimized for android
misc: CRT off-screen effect support
misc: PN544 NFC works (I9070P only)
mali: Utilization control
mali: PP scheduler tweakable
mali: PM sampling rate tweakable
mali: L2 cache max reads writable
mali: Max preemptive allocated OS memory size control
mali: Pre-allocated memory size 16mb -> 24mb
mali: Disabled mali state tracking
block: 8 IO schedulers
snvet: Reduce the waketime 6s -> 1s
sched: Enable arch_power by default
sched: Disable sched debug stuff
prcmu: Clock control module [Thanks Adi_Pat for module framework]
sched: ARM multi-core scheduler
debug: Remove Samsung debug code [Adi_Pat]
debug: Disable KGDB [Adi_Pat]
debug: Remove frame pointer [Adi_Pat]
debug: Fixed mismatches [Adi_Pat]
debug: Android logger as module (freed 4mb RAM)
debug: Disable function tracer
st-mmio: Highlight mode for rear LED flash
mxt224e: Sensitivity threshold on battery improved by defualt
mxt224e: Touch booster control
mxt224e: Touch params control
mxt224e: Touch auto calibration
mxt224e: Sweep2Wake Implementation
mxt224e: TouchScreen configs writable
mxt224e: Frequency of reporting touch events increased
mxt224e: Touch issues of left and right sides fixed!!
s6e63m0: Startup gamma issues fixed
s6e63m0: Color filters (In technical, It's While RGB)
s6e63m0: Gamma tuner
s6e63m0: Brightness unlocked
s6e63m0: Ultra-low brightness
s6e63m0: Illumination(brightness) table tuner
s6e63m0: Allowed maximum brightness in manual mode
s6e63m0: LCD clock tweakable (FPS limitable)
bcmdhd: PM_FAST mode by default (faster WiFi)
bcmdhd: Reenable ipv6 and disable multicast in suspend [Andrew Dodd]
kernel: LZO compression
random: Entropy tweaks [dorimanx]
random: Frandom module support
ramdisk: Custom bootanimation supports [diego-ch,thank you!]
ramdisk: LZO compression
ramdisk: Init.d scripts supports
ramdisk: ADB permission fixed (prompt SU permission by default)
ramdisk: Enabled ADB in LPM charging
ramdisk: ClockworkMod Recovery 6.0.2.8 [diego-ch]
ramdisk: ClockworkMod Recovery 6.0.3.4 [CyanogenMod, thanks OliverG96]
ramdisk: ClockworkMod Touch Recovery 6.0.3.3 [CyanogenMod, thanks OliverG96]
ramdisk: Team Win Recovery Project 2.6.1.0 [TeamWin]
cpufreq: 13 available CPU governors
cpufreq: Fix CPU1 hotplug issues when swtching governors
cpuidle: Deeper sleep state
makefile: Useful optimization flags
ux500 pcm: Correct max PCM periods bytes
toolchain: Linaro GCC 4.6.2
fs: FSYNC control (Combined dyn fsync control)
fs: Mount noatime and nodiratime by defualt [franciscofranco]
fs/aio: Asynchronous io performance improved
mm: SLUB memory allocator
arm: ThumbEE supports
arm: Optimzed rwsem algorithm [ezekeel]
arm: Remove old version sha1 implementation
arm: CPU unaligned access path
arm/vfp: Build with neon
arm/crypto: ARM AES and SHA-1 crypto implementation
arm/topology: Linaro lastest patches
abb-Codec: ABBamp audio v2.4 (sound control)
abb-Regulator: VOTG power supply*
abb-Charger: Charger control
abb-Chargalg: Charge cycle control
abb-Chargalg: Real charged notification
abb-POnKey: PowerOn Key emulator
lib: Optimzed CRC32 algorithm [ezekeel]
lib: GNU C version memcpy
net: More choices of TCP congestions
net: Proportional Rate Reduction for TCP (PRR implementation)
mmc: SPI CRC can be disabled!
rcu: jRCU [Joe Korty]
swap: swap supports
zram: optimized for android
misc: CRT off-screen effect support
misc: PN544 NFC works (I9070P only)
mali: Utilization control
mali: PP scheduler tweakable
mali: PM sampling rate tweakable
mali: L2 cache max reads writable
mali: Max preemptive allocated OS memory size control
mali: Pre-allocated memory size 16mb -> 24mb
mali: Disabled mali state tracking
block: 8 IO schedulers
snvet: Reduce the waketime 6s -> 1s
sched: Enable arch_power by default
sched: Disable sched debug stuff
prcmu: Clock control module [Thanks Adi_Pat for module framework]
sched: ARM multi-core scheduler
debug: Remove Samsung debug code [Adi_Pat]
debug: Disable KGDB [Adi_Pat]
debug: Remove frame pointer [Adi_Pat]
debug: Fixed mismatches [Adi_Pat]
debug: Android logger as module (freed 4mb RAM)
debug: Disable function tracer
st-mmio: Highlight mode for rear LED flash
mxt224e: Sensitivity threshold on battery improved by defualt
mxt224e: Touch booster control
mxt224e: Touch params control
mxt224e: Touch auto calibration
mxt224e: Sweep2Wake Implementation
mxt224e: TouchScreen configs writable
mxt224e: Frequency of reporting touch events increased
mxt224e: Touch issues of left and right sides fixed!!
s6e63m0: Startup gamma issues fixed
s6e63m0: Color filters (In technical, It's While RGB)
s6e63m0: Gamma tuner
s6e63m0: Brightness unlocked
s6e63m0: Ultra-low brightness
s6e63m0: Illumination(brightness) table tuner
s6e63m0: Allowed maximum brightness in manual mode
s6e63m0: LCD clock tweakable (FPS limitable)
bcmdhd: PM_FAST mode by default (faster WiFi)
bcmdhd: Reenable ipv6 and disable multicast in suspend [Andrew Dodd]
kernel: LZO compression
random: Entropy tweaks [dorimanx]
random: Frandom module support
ramdisk: Custom bootanimation supports [diego-ch,thank you!]
ramdisk: LZO compression
ramdisk: Init.d scripts supports
ramdisk: ADB permission fixed (prompt SU permission by default)
ramdisk: Enabled ADB in LPM charging
ramdisk: ClockworkMod Recovery 6.0.2.8 [diego-ch]
ramdisk: ClockworkMod Recovery 6.0.3.4 [CyanogenMod, thanks OliverG96]
ramdisk: ClockworkMod Touch Recovery 6.0.3.3 [CyanogenMod, thanks OliverG96]
ramdisk: Team Win Recovery Project 2.6.1.0 [TeamWin]
cpufreq: 13 available CPU governors
cpufreq: Fix CPU1 hotplug issues when swtching governors
cpuidle: Deeper sleep state
makefile: Useful optimization flags
ux500 pcm: Correct max PCM periods bytes
toolchain: Linaro GCC 4.6.2
CHANGELOG
2013-11-03 hotfix update
defconfig: version tag 8.0 -> 8.1 -> 8.2 …
mxt224e: disable touch booster by default (To save batterylife)
bcmdhd: off-screen pm mode MAX -> FAST (This is made for bcmdhd updated driver)
board-janice: mxt224e threshold batt 17 -> 15 (More sensitive)
block: downgrade bfq iosched v6r2 -> v5r1 (V6R2 has bugs which causes reboots)
power/wakelock: driver updates (Optimizes code)
sysfs: driver updates
fs/nls: driver updates
fs/fat: driver updates (Fixes FatFS name char issues)
tspdrv: driver updates (Optimizes code)
gp2a_light_prox: driver updates (Optimizes code)
ux500_usb: driver updates (Seems that it fixes UMS(USB Mass Storage) issues)
net/wireless: bcmdhd driver updates
(Now CoCore-E has synced up with lastest Samsung Kernel source)
2013-09-21
defconfig: version tag 7.6 -> 7.7 -> 7.8 -> 8.0
rcu: jRCU with lazy mode (To reduce RCU memory usage, designed for multi-core CPU)
mali: reset l2 max reads (According to documents, we have a fixed 32kb l2 size.)
mxt224e: fix threshold on charging (namely, fixed touch issues at the bottom on charging)
ux500 pcm: Proper#ed max pcm buffer rate
sysctl: tweak vm params (supports to fix memory leaks)
2013-09-03
defconfig: version tag 7.2 -> 7.6
rcu: enable fast nohz mode
mali: reduce pre-allocated os memory 24mb -> 16mb (to save some RAM for other things)
board-janice: reset BASEFREQ param of touchscreen (in order to fix the touching issues when charging)
board-janice: reset YEDGEDIST param of touchscreen (in order to fix the touch position offsets)
ramdisk: update TWRP recovery 2.6.0.0 -> 2.6.1.0
ramdisk: enable ADB function in LPM charging
s6e63m0: new gamma mode interface
s6e63m0: entry for tweaking lcdclk
s6e63m0: reduce the level0 illumination of illumination table (dimming more a bit at lowest brightness)
mxt22e: reduce x threshold of sweep2wake
snd_usb: fix sysfs conflicts
block: update BFQ iosched v5r1 -> v6r2
2013-08-24
defconfig: version tag 7.0 -> 7.2 - Stablity Update
misc: fix some small bugs during rebooting
arm: use previous hotplug timer for our platform(in order to reduce the possiblity of death sleep/wakeup)
arm: use simple spinlock (old implementation) instead of the new one (for stablity)
sched: enable /d/sched_features (so that you can tweak some sched features)
abb-chargalg: when real EOC reached, phone will wake up for seconds to notice user: charging has finished
mm: swtich SLQB -> SLUB memory allocator to get more stablity
mm/SLUB: use costly page orders (looks more smooth)
2013-07-25
defconfig: version tag 6.8 -> 6.9 -> 7.0
ramdisk: TWRP Recovery 2.5.0.0 -> 2.6.0.0
ramdisk: CWM Recovery 6.0.2.8 -> 6.0.3.4 (optional)
ramdisk: CWM Touch Recovery 6.0.3.3 (thanks OliverG96)
ramdisk: Fix ADB permission issues (SU permission by default, or it will return ERROR when pushing files)
param: correct param driver indexs
param: add debug module for developers
mxt224e: allow disabling freq requests of touchboost
cypress-touchkey: touch2wake when has wakelocks
mach-ux500: add janice gpio debug driver
mach-ux500: add janice dvfs debug driver
abb-codec: ABBamp audio v2.4 (optimized driver)
debug: disable a lot of debug stuff
cpufreq: remove lulzactivew governor (rather than use Performance governor)
cpufreq/ondemandq: replug up cpu1 when governor starts
cpufreq/ondemand: replug CPU1 when governor starts
cpufreq/performance: replug CPU1 when governor starts
cpufreq/interactive: replug CPU1 when governor starts
abb-chargalg: add private charger control
abb-POnKey: implement PowerOn Key emulator (can emulate power key via sysfs)
ARM: spinlock: use ticket algorithm for ARMv6+ locking implementation
ARM: SMP: use a timing out completion for cpu hotplug
TCP: Proportional Rate Reduction (better TCP performance, tested!)
mxt224e: remove auto calibration
mxt224e: sweep2wake implementation
mxt224e: touchscreen configs control-able
mxt224e: new param control (movefilter, numtouch, custom-able parameters)
mxt224e: new threshold control (this is the real one!)
mxt224e: increase report events frequency
mxt224e: fix touch issues on left and right sides (touch issues of top and bottom sides aren't able to fix, hardware issues!)
audio: Fix for choppy playback in Ubuntu pulse audio (patched it again)
mali: pre-allocated max memory size writable
mali: Pre-allocated memory size 16mb -> 24mb
sched: remove MC/SMT scheduler forever (they are broken and performance dropper)
sched: disable arch power
bcmdhd: reenable ipv6 and disable multicast in suspend
drivers/mmc: SPI CRC configurable
gpio-keys: POnKey emulator on Vol Up/Down
mm: SLUb -> SLAB -> SLQB
st-mmio: add highlight mode for rear flash led (it will heat up your phone, don't use for a long time!)
2013-06-12
defconfig: version tag 6.2 -> 6.3 -> 6.4 -> 6.6 -> 6.8
ramdisk: fix insmoding logger issues
random: read wakeup threshold 512 -> 256
s6e63m0: allow maximum gamma level in manual mode
s6e63m0: fix and add tweakable illumination table
cpufreq/ondemandq: update and fix dead sleep issues
cpufreq: add lulzactivew
cpufreq: add lulzactiveQ
abb-chargalg: enable sysfs charger control
abb-chargalg: update real eoc sysfs entries
fs: update fsync control 0.4
abb-charger: update charger control
audio: Fix for choppy playback in Ubuntu pulse audio
abb-codec: ABBamp audio v2.3b
abb-regulator: add Varm HW mode option
board-janice: add pn544 nfc platform data
misc: support I9070P, still beta now
2013-05-19
defconfig: version tag 6.0 -> 6.1 -> 6.2
block: bfq iosched v6 -> v6r1 -> v5r1 (v6r1 and v6 are unstable)
cpufreq: add and fix ondemandq governor
mxt224e: enhance and update touch params control
mxt224e: rename touch_boost -> touchboost
random: tune entropy parameter
lpm.rc: set hotplug governor when charging in low-power mode namely non-booting charging
abb-regu: add VOTG sysfs interface (otg isnt available yet,i'm sorry,but you can use usb fan now!~)
2013-05-01
defconfig: version tag 5.7.3 -> 6.0
random: entropy tweaks are all the rage nowadays
block: default iosched bfq -> cfq
block: update bfq iosched v5r1 -> v6
mxt224e: clean auto calibration
s6e63m0: add elvss table interface
cpufreq: disable ondemandq,i will fix it later
cpuidle: deepest state 4 -> 3
arm: remove cpu unaligned access path (suposed to fix sudden reboots)
scripts: remove the '+' at the end of local version string
cypress-touchkey: add interface to write touchkey threshold
abb-codec: headset hp filter default 0 -> 1
s6e63m0: color filters and gamma tuner
2013-04-21
defconfig: bump version 5.3 -> 5.6 -> 5.6.2
ab8500-codec: improve sound control
block: fix a bug of zen io scheduler
bcmdhd: fix wifi power in standby
s6e63m0: rename conflicts sysfs file lcd_power -> ldi_power
s6e63m0: fix the permission of ldi_power
s6e63m0: fix gamma mode issues after startup (Samsungs fault)
arm: cpu unaligned access path
fbearlysuspend: increase fbdaley time 50ms -> 350ms
mali: fix l2 cache reads when delete cache cores
mali: osmem max buffer size 64mb -> 16mb
drivers/char: add frandom module
mach-ux500: update prcmu clock control module
mxt224e: reduce threshold chrg 25 -> 20 (fix touch issues when charging)
mxt224e: update touch sensitivity control (touch params control)
mxt224e: default touchboost cpufreq 800000 -> 400000 (for more power saving)
mxt224e: update touch auto calibration
fs: keep param partition R/W for saving boot params (fix cwm reboot commands issues)
cpufreq: add debug mask to shut up annoying noise
s6e63m0: fix samsung's typos(warnings)
ramdisk: add twrp 2.5.0.0
ramdisk: fix sbin permisson
2013-03-31
defconfig: bump version 5.1 -> 5.3
ramdisks: fix bootanimation script
ramdisks: add fstrim binary
mali: osmem buffer size 64mb -> 16mb
mali: fix l2 cache reads when delete core
block/bfq: remove the "optimized" tweaks
fbearlysuspend: delay time 50ms -> 350ms
ab8500-codec: add a gain delay param
mxt224e: chrg threshold 25 -> 20
mxt224e: read threshold params from pdata
s6e63m0: fix a sysfs error
drivers/char: add frandom modulem
mach-ux500: finish prcmu clock control module
2013-03-24
defconfig: bump version 5.0 -> 5.1
ramdisk: remove kill bootanimation
fbearlysuspend: add stop drawing delay param
ab8500-codec: add earpiece widget event
ad8500-codec: add mic2 gain control
ab8500-codec: enhance sound control
mali: osmem max buffers 16mb -> 64mb
2013-03-17
defconfig:bump version 4.8 -> 5.0
ramdisk:update twrp 2.4.3.0 -> 2.4.4.0
ramdisk:add custom bootanimation support
cpufreq:add zzmoove governor
ab8500-codec:move anagain3
ab8500-codec:disable debugging
ab8500-codec:rename parameters
ab8500-codec:remove hs widget event
ab8500-codec:add classD high volume control
ab8500-codec:add ihf dac widget event
2013-03-10
defconfig:bump version 4.4 -> 4.8
ramdisk:twrp update 2.4.1.1 -> 2.4.3.0
mxt224e:improve touchbooster
misc:fix modifier name
ab8500-chargalg:edit eoc messages
ab8500-codec:remove shortcir control
ab8500-codec:improve anagain3 control
ab8500-codec:add detected chipid
ab8500-codec:add hsxgain control
ab8500-codec:add micxgain control
ab8500-codec:add hs lowpow control
ab8500-codec:add hs dac lp control
ab8500-codec:add hs hpf control
ab8500-codec:add classD hp/wg control
ab8500-codec:add hsx diggain control
2013-03-03
defconfig: bump version 4.2 -> 4.4
cpufreq: remove nightmare
cpufreq: add smartassv2 abyssplug
swap: enable zram
2013-02-24
cpufreq: fix nightmare hotplug freqs
arm: disable multi-core scheduler
ramdisk: disable multi-core scheduler
cmdline: extend -> bootloader
rcu: jrcu -> tree preempt rcu
2013-02-23
defconfig: bump version 4.0 -> 4.2
cmdline: select extend cmdline
cmdline: add tty console command
jrcu: disable lazy jrcu
ramdisk: add twrp 2.4.1.0
2013-02-21
defconfig: bump version 3.9 -> 4.0
android-logger: make it as module
ab8500-chargalg: fix eoc_status bug
2013-02-20
sched: disable autogroup
rcu: enable jrcu
arm: disable bpf jit
arm: enable mc sched
cpufreq: add ondemandq
cpufreq: add nightmare
2013-02-19
defconfig: bump version 3.5 -> 3.9
sched: enable autogroup
arm: disable mc/smt sched
ramdisk: disable ms/smt sched
fs: combine dyn fsync control
ab8500-chargalg: add real charged notification
ab8500-chargalg: add full charging cycle control
misc: apply aditya's mismatches patches
svnet: reduce waketime 6s -> 1s
2013-02-18
arm: enable multi-threading scheduler
include: in filter.h add if bpf configs
2013-02-17
defconfig: bump version 3.3 -> 3.5
mali: dlbu size 1024kb -> 4096kb -> 1024kb
ramdisk: make hwreg hwrandom as modules
2013-02-16
defconfig: bump version 3.1 -> 3.3
ramdisk: move cifs.ko out (it is too big)
mali: dlub size 2048kb -> 1024kb
arm: add bpf net jit filter
mach-ux500: fix a inline error
2013-02-15
ramdisk: lzop compression
cypress-touckey: all my experiments failed!
2013-02-14
defconfig: bump version 3.0 -> 3.1
fs/sync: implement fsync control via moduleparam
mm: increase max readahead 128kb -> 256kb -> 128kb
mali: max l2 cache cores 3 -> 5 -> 3
mali: dlbu size 1024kb -> 2048kb
arm: add optimized swab32
arm: enable multi-core scheduler
arm: enable linaro cpupower driver
arm: add xz kernel compression
ramdisk: enable multi-core scheduler
cpufreq: add hotplug governor
2013-02-13
defconfig: bump version 2.9 -> 3.0
defconfig: switch lzop compression
defconfig: disable slub debugging
arm/vfp: fix vfp thread holes
b2r2: increase heap size 4 -> 8 128 -> 256
2013-02-11
musb: add otg extra power support
ramdisk: 2nd bootstage kernel boots
2013-02-10
defconfig: bump version to 2.8 -> 2.9
bcmdhd: remove suspend pm control
ramdisk: add cwm ramdisk
2013-02-09
defconfig:bump version to 2.6 -> 2.8
fs:enable cifs as module
drivers/char:include rng-core and hwreg into kernel
bcmdhd:add suspend pm control
bcmdhd:disable support_pm2_only
2013-02-08
mxt224e:add touch sensitivity control
mxt224e:charging threshold 22 -> 25
maxt224e:battery threshold 16 -> 17
ab8500_asoc:remove anc fir iir moduleparams
ab8500_charger:add charger control
2013-02-07
defconfig:bump version 2.4 -> 2.6
defconfig:remove usb otg 2.0 config
ab8500_asoc:remove vcp controls
ab8500_asoc:add anc fir/iir controls
mxt224e:add tsp threshold control
mxt224e:add touch booster control
2013-02-06
mm:disable cleancache (useless,doesnt work)
staging:disable zcache (useless,doesnt work)
kconfig:disable frame pointer debugger
cpufreq:add ondemand idle detection
ab8500_asoc:add two confs control
defconfig:enable usb otg 2.0 config
2013-02-04
defconfig:bump version 2.3 -> 2.4
mali: add pp scheduler control
rcu: enable rcu prio boost
mm: enable cleancache
staging: enable zcache
2013-02-03
defconfig: bump version 2.2 -> 2.3
ab8500_asoc: optimize sound control code
ab8500_asoc: remove power_on detection
ab8500_asoc: track anagain1/2/3/4
ab8500_asoc: add power_on detection add anagain4 control
ab8500_asoc: remove anagain4(useless) control,add shortcir control
2013-02-01
defconfig:bump version 2.0 -> 2.2
mali:add mali pm sampling rate module param
mali:add mali l2 size module param
mali:l2 max cache cores 5 -> 3
mali:gpu utilization sampling rate 500 -> 1000
lib:add glibc version memcpy
lib:add glibc version string
lib:add optimized crc32
ab8500_asoc:implemented headset volume control
2013-01-31
defconfig:bump version 1.8 -> 2.0
defconfig:remove rcu debugging print
defconfig:remove kgdb debugging
arm:remove old sha1
arm/topology:apply linaro patches
arm/crypto:add arm aes sha1 crypto
arm/power:add linaro dual cortex-a9 cpu power driver
arm/makefile:add -pipe
mali:gpu utilization time out 1000 -> 500
mali:add utilization limit module params
block:add bfq flash deivces tweaks
2013-01-30
defconfig: bump version 1.1 -> 1.8
cpufreq: update pegasusq
cpufreq: update pegasusq freq table
mali: gpu utilization time out 500 -> 1000
mali: add utilization sampling rate moduleparam
mali: l2 max reads writable
slub:avoid overahead
fs: add ezekeel fsync control
fs: mount noatime nodiratime by default
arm:add ezekeel rwsem implementation
net:disable hybla conf
2013-01-24
mali: os memory size 20mb -> 16mb
mali: l2 max cache cores 4 -> 5
ramdisk: remove noop,set ondemand
build.sh: linaro gcc 4.6
defconfig: bump version to 1.1
2013-01-22
rcu: remove fast nohz rcu
board-janice: improve mxt224-e sensitivity
ramdisk: disable cfq,ondemand
arm: disable mc scheduler
mali: os memory size 16mb -> 20mb (+4mb)
mali: l2 max cache cores 3 -> 4
2013-01-20
defconfig: u8500_CoCoE_defconfig
defconfig: kernel/ramdisk compression gzip -> lzop
drivers/samsung: merge param driver
drivers/samsung: merge j4fs driver
block: add bfq(v5r1) io scheduler
block: add row(v4) io scheduler
block: fix row compatibility
block: add sio io scheduler
block: add zen io scheduler
block:add vr io scheduler
mali: fix arch link
mali: disable mali state tracking
mali: max l2 reads 28kb -> 48kb
mm: slab -> slub
fs/aio: improve asynchronous io performance
cpuidle: deepest sleep state 3 -> 4
cpufreq: add pegasusq governor
sched: add nr_running symbol
sched: enable arch_power
arm: enable thumbee
arm/vfp: hardfloat+neon
net: enable advanced tcp configs
rcu: enable fast nohz rcu
board-janice: improve mxt224-e touchscreen sensitivity
bcm4330: screen off pm pm_max -> pm_fast
defconfig: version tag 8.0 -> 8.1 -> 8.2 …
mxt224e: disable touch booster by default (To save batterylife)
bcmdhd: off-screen pm mode MAX -> FAST (This is made for bcmdhd updated driver)
board-janice: mxt224e threshold batt 17 -> 15 (More sensitive)
block: downgrade bfq iosched v6r2 -> v5r1 (V6R2 has bugs which causes reboots)
power/wakelock: driver updates (Optimizes code)
sysfs: driver updates
fs/nls: driver updates
fs/fat: driver updates (Fixes FatFS name char issues)
tspdrv: driver updates (Optimizes code)
gp2a_light_prox: driver updates (Optimizes code)
ux500_usb: driver updates (Seems that it fixes UMS(USB Mass Storage) issues)
net/wireless: bcmdhd driver updates
(Now CoCore-E has synced up with lastest Samsung Kernel source)
2013-09-21
defconfig: version tag 7.6 -> 7.7 -> 7.8 -> 8.0
rcu: jRCU with lazy mode (To reduce RCU memory usage, designed for multi-core CPU)
mali: reset l2 max reads (According to documents, we have a fixed 32kb l2 size.)
mxt224e: fix threshold on charging (namely, fixed touch issues at the bottom on charging)
ux500 pcm: Proper#ed max pcm buffer rate
sysctl: tweak vm params (supports to fix memory leaks)
2013-09-03
defconfig: version tag 7.2 -> 7.6
rcu: enable fast nohz mode
mali: reduce pre-allocated os memory 24mb -> 16mb (to save some RAM for other things)
board-janice: reset BASEFREQ param of touchscreen (in order to fix the touching issues when charging)
board-janice: reset YEDGEDIST param of touchscreen (in order to fix the touch position offsets)
ramdisk: update TWRP recovery 2.6.0.0 -> 2.6.1.0
ramdisk: enable ADB function in LPM charging
s6e63m0: new gamma mode interface
s6e63m0: entry for tweaking lcdclk
s6e63m0: reduce the level0 illumination of illumination table (dimming more a bit at lowest brightness)
mxt22e: reduce x threshold of sweep2wake
snd_usb: fix sysfs conflicts
block: update BFQ iosched v5r1 -> v6r2
2013-08-24
defconfig: version tag 7.0 -> 7.2 - Stablity Update
misc: fix some small bugs during rebooting
arm: use previous hotplug timer for our platform(in order to reduce the possiblity of death sleep/wakeup)
arm: use simple spinlock (old implementation) instead of the new one (for stablity)
sched: enable /d/sched_features (so that you can tweak some sched features)
abb-chargalg: when real EOC reached, phone will wake up for seconds to notice user: charging has finished
mm: swtich SLQB -> SLUB memory allocator to get more stablity
mm/SLUB: use costly page orders (looks more smooth)
2013-07-25
defconfig: version tag 6.8 -> 6.9 -> 7.0
ramdisk: TWRP Recovery 2.5.0.0 -> 2.6.0.0
ramdisk: CWM Recovery 6.0.2.8 -> 6.0.3.4 (optional)
ramdisk: CWM Touch Recovery 6.0.3.3 (thanks OliverG96)
ramdisk: Fix ADB permission issues (SU permission by default, or it will return ERROR when pushing files)
param: correct param driver indexs
param: add debug module for developers
mxt224e: allow disabling freq requests of touchboost
cypress-touchkey: touch2wake when has wakelocks
mach-ux500: add janice gpio debug driver
mach-ux500: add janice dvfs debug driver
abb-codec: ABBamp audio v2.4 (optimized driver)
debug: disable a lot of debug stuff
cpufreq: remove lulzactivew governor (rather than use Performance governor)
cpufreq/ondemandq: replug up cpu1 when governor starts
cpufreq/ondemand: replug CPU1 when governor starts
cpufreq/performance: replug CPU1 when governor starts
cpufreq/interactive: replug CPU1 when governor starts
abb-chargalg: add private charger control
abb-POnKey: implement PowerOn Key emulator (can emulate power key via sysfs)
ARM: spinlock: use ticket algorithm for ARMv6+ locking implementation
ARM: SMP: use a timing out completion for cpu hotplug
TCP: Proportional Rate Reduction (better TCP performance, tested!)
mxt224e: remove auto calibration
mxt224e: sweep2wake implementation
mxt224e: touchscreen configs control-able
mxt224e: new param control (movefilter, numtouch, custom-able parameters)
mxt224e: new threshold control (this is the real one!)
mxt224e: increase report events frequency
mxt224e: fix touch issues on left and right sides (touch issues of top and bottom sides aren't able to fix, hardware issues!)
audio: Fix for choppy playback in Ubuntu pulse audio (patched it again)
mali: pre-allocated max memory size writable
mali: Pre-allocated memory size 16mb -> 24mb
sched: remove MC/SMT scheduler forever (they are broken and performance dropper)
sched: disable arch power
bcmdhd: reenable ipv6 and disable multicast in suspend
drivers/mmc: SPI CRC configurable
gpio-keys: POnKey emulator on Vol Up/Down
mm: SLUb -> SLAB -> SLQB
st-mmio: add highlight mode for rear flash led (it will heat up your phone, don't use for a long time!)
2013-06-12
defconfig: version tag 6.2 -> 6.3 -> 6.4 -> 6.6 -> 6.8
ramdisk: fix insmoding logger issues
random: read wakeup threshold 512 -> 256
s6e63m0: allow maximum gamma level in manual mode
s6e63m0: fix and add tweakable illumination table
cpufreq/ondemandq: update and fix dead sleep issues
cpufreq: add lulzactivew
cpufreq: add lulzactiveQ
abb-chargalg: enable sysfs charger control
abb-chargalg: update real eoc sysfs entries
fs: update fsync control 0.4
abb-charger: update charger control
audio: Fix for choppy playback in Ubuntu pulse audio
abb-codec: ABBamp audio v2.3b
abb-regulator: add Varm HW mode option
board-janice: add pn544 nfc platform data
misc: support I9070P, still beta now
2013-05-19
defconfig: version tag 6.0 -> 6.1 -> 6.2
block: bfq iosched v6 -> v6r1 -> v5r1 (v6r1 and v6 are unstable)
cpufreq: add and fix ondemandq governor
mxt224e: enhance and update touch params control
mxt224e: rename touch_boost -> touchboost
random: tune entropy parameter
lpm.rc: set hotplug governor when charging in low-power mode namely non-booting charging
abb-regu: add VOTG sysfs interface (otg isnt available yet,i'm sorry,but you can use usb fan now!~)
2013-05-01
defconfig: version tag 5.7.3 -> 6.0
random: entropy tweaks are all the rage nowadays
block: default iosched bfq -> cfq
block: update bfq iosched v5r1 -> v6
mxt224e: clean auto calibration
s6e63m0: add elvss table interface
cpufreq: disable ondemandq,i will fix it later
cpuidle: deepest state 4 -> 3
arm: remove cpu unaligned access path (suposed to fix sudden reboots)
scripts: remove the '+' at the end of local version string
cypress-touchkey: add interface to write touchkey threshold
abb-codec: headset hp filter default 0 -> 1
s6e63m0: color filters and gamma tuner
2013-04-21
defconfig: bump version 5.3 -> 5.6 -> 5.6.2
ab8500-codec: improve sound control
block: fix a bug of zen io scheduler
bcmdhd: fix wifi power in standby
s6e63m0: rename conflicts sysfs file lcd_power -> ldi_power
s6e63m0: fix the permission of ldi_power
s6e63m0: fix gamma mode issues after startup (Samsungs fault)
arm: cpu unaligned access path
fbearlysuspend: increase fbdaley time 50ms -> 350ms
mali: fix l2 cache reads when delete cache cores
mali: osmem max buffer size 64mb -> 16mb
drivers/char: add frandom module
mach-ux500: update prcmu clock control module
mxt224e: reduce threshold chrg 25 -> 20 (fix touch issues when charging)
mxt224e: update touch sensitivity control (touch params control)
mxt224e: default touchboost cpufreq 800000 -> 400000 (for more power saving)
mxt224e: update touch auto calibration
fs: keep param partition R/W for saving boot params (fix cwm reboot commands issues)
cpufreq: add debug mask to shut up annoying noise
s6e63m0: fix samsung's typos(warnings)
ramdisk: add twrp 2.5.0.0
ramdisk: fix sbin permisson
2013-03-31
defconfig: bump version 5.1 -> 5.3
ramdisks: fix bootanimation script
ramdisks: add fstrim binary
mali: osmem buffer size 64mb -> 16mb
mali: fix l2 cache reads when delete core
block/bfq: remove the "optimized" tweaks
fbearlysuspend: delay time 50ms -> 350ms
ab8500-codec: add a gain delay param
mxt224e: chrg threshold 25 -> 20
mxt224e: read threshold params from pdata
s6e63m0: fix a sysfs error
drivers/char: add frandom modulem
mach-ux500: finish prcmu clock control module
2013-03-24
defconfig: bump version 5.0 -> 5.1
ramdisk: remove kill bootanimation
fbearlysuspend: add stop drawing delay param
ab8500-codec: add earpiece widget event
ad8500-codec: add mic2 gain control
ab8500-codec: enhance sound control
mali: osmem max buffers 16mb -> 64mb
2013-03-17
defconfig:bump version 4.8 -> 5.0
ramdisk:update twrp 2.4.3.0 -> 2.4.4.0
ramdisk:add custom bootanimation support
cpufreq:add zzmoove governor
ab8500-codec:move anagain3
ab8500-codec:disable debugging
ab8500-codec:rename parameters
ab8500-codec:remove hs widget event
ab8500-codec:add classD high volume control
ab8500-codec:add ihf dac widget event
2013-03-10
defconfig:bump version 4.4 -> 4.8
ramdisk:twrp update 2.4.1.1 -> 2.4.3.0
mxt224e:improve touchbooster
misc:fix modifier name
ab8500-chargalg:edit eoc messages
ab8500-codec:remove shortcir control
ab8500-codec:improve anagain3 control
ab8500-codec:add detected chipid
ab8500-codec:add hsxgain control
ab8500-codec:add micxgain control
ab8500-codec:add hs lowpow control
ab8500-codec:add hs dac lp control
ab8500-codec:add hs hpf control
ab8500-codec:add classD hp/wg control
ab8500-codec:add hsx diggain control
2013-03-03
defconfig: bump version 4.2 -> 4.4
cpufreq: remove nightmare
cpufreq: add smartassv2 abyssplug
swap: enable zram
2013-02-24
cpufreq: fix nightmare hotplug freqs
arm: disable multi-core scheduler
ramdisk: disable multi-core scheduler
cmdline: extend -> bootloader
rcu: jrcu -> tree preempt rcu
2013-02-23
defconfig: bump version 4.0 -> 4.2
cmdline: select extend cmdline
cmdline: add tty console command
jrcu: disable lazy jrcu
ramdisk: add twrp 2.4.1.0
2013-02-21
defconfig: bump version 3.9 -> 4.0
android-logger: make it as module
ab8500-chargalg: fix eoc_status bug
2013-02-20
sched: disable autogroup
rcu: enable jrcu
arm: disable bpf jit
arm: enable mc sched
cpufreq: add ondemandq
cpufreq: add nightmare
2013-02-19
defconfig: bump version 3.5 -> 3.9
sched: enable autogroup
arm: disable mc/smt sched
ramdisk: disable ms/smt sched
fs: combine dyn fsync control
ab8500-chargalg: add real charged notification
ab8500-chargalg: add full charging cycle control
misc: apply aditya's mismatches patches
svnet: reduce waketime 6s -> 1s
2013-02-18
arm: enable multi-threading scheduler
include: in filter.h add if bpf configs
2013-02-17
defconfig: bump version 3.3 -> 3.5
mali: dlbu size 1024kb -> 4096kb -> 1024kb
ramdisk: make hwreg hwrandom as modules
2013-02-16
defconfig: bump version 3.1 -> 3.3
ramdisk: move cifs.ko out (it is too big)
mali: dlub size 2048kb -> 1024kb
arm: add bpf net jit filter
mach-ux500: fix a inline error
2013-02-15
ramdisk: lzop compression
cypress-touckey: all my experiments failed!
2013-02-14
defconfig: bump version 3.0 -> 3.1
fs/sync: implement fsync control via moduleparam
mm: increase max readahead 128kb -> 256kb -> 128kb
mali: max l2 cache cores 3 -> 5 -> 3
mali: dlbu size 1024kb -> 2048kb
arm: add optimized swab32
arm: enable multi-core scheduler
arm: enable linaro cpupower driver
arm: add xz kernel compression
ramdisk: enable multi-core scheduler
cpufreq: add hotplug governor
2013-02-13
defconfig: bump version 2.9 -> 3.0
defconfig: switch lzop compression
defconfig: disable slub debugging
arm/vfp: fix vfp thread holes
b2r2: increase heap size 4 -> 8 128 -> 256
2013-02-11
musb: add otg extra power support
ramdisk: 2nd bootstage kernel boots
2013-02-10
defconfig: bump version to 2.8 -> 2.9
bcmdhd: remove suspend pm control
ramdisk: add cwm ramdisk
2013-02-09
defconfig:bump version to 2.6 -> 2.8
fs:enable cifs as module
drivers/char:include rng-core and hwreg into kernel
bcmdhd:add suspend pm control
bcmdhd:disable support_pm2_only
2013-02-08
mxt224e:add touch sensitivity control
mxt224e:charging threshold 22 -> 25
maxt224e:battery threshold 16 -> 17
ab8500_asoc:remove anc fir iir moduleparams
ab8500_charger:add charger control
2013-02-07
defconfig:bump version 2.4 -> 2.6
defconfig:remove usb otg 2.0 config
ab8500_asoc:remove vcp controls
ab8500_asoc:add anc fir/iir controls
mxt224e:add tsp threshold control
mxt224e:add touch booster control
2013-02-06
mm:disable cleancache (useless,doesnt work)
staging:disable zcache (useless,doesnt work)
kconfig:disable frame pointer debugger
cpufreq:add ondemand idle detection
ab8500_asoc:add two confs control
defconfig:enable usb otg 2.0 config
2013-02-04
defconfig:bump version 2.3 -> 2.4
mali: add pp scheduler control
rcu: enable rcu prio boost
mm: enable cleancache
staging: enable zcache
2013-02-03
defconfig: bump version 2.2 -> 2.3
ab8500_asoc: optimize sound control code
ab8500_asoc: remove power_on detection
ab8500_asoc: track anagain1/2/3/4
ab8500_asoc: add power_on detection add anagain4 control
ab8500_asoc: remove anagain4(useless) control,add shortcir control
2013-02-01
defconfig:bump version 2.0 -> 2.2
mali:add mali pm sampling rate module param
mali:add mali l2 size module param
mali:l2 max cache cores 5 -> 3
mali:gpu utilization sampling rate 500 -> 1000
lib:add glibc version memcpy
lib:add glibc version string
lib:add optimized crc32
ab8500_asoc:implemented headset volume control
2013-01-31
defconfig:bump version 1.8 -> 2.0
defconfig:remove rcu debugging print
defconfig:remove kgdb debugging
arm:remove old sha1
arm/topology:apply linaro patches
arm/crypto:add arm aes sha1 crypto
arm/power:add linaro dual cortex-a9 cpu power driver
arm/makefile:add -pipe
mali:gpu utilization time out 1000 -> 500
mali:add utilization limit module params
block:add bfq flash deivces tweaks
2013-01-30
defconfig: bump version 1.1 -> 1.8
cpufreq: update pegasusq
cpufreq: update pegasusq freq table
mali: gpu utilization time out 500 -> 1000
mali: add utilization sampling rate moduleparam
mali: l2 max reads writable
slub:avoid overahead
fs: add ezekeel fsync control
fs: mount noatime nodiratime by default
arm:add ezekeel rwsem implementation
net:disable hybla conf
2013-01-24
mali: os memory size 20mb -> 16mb
mali: l2 max cache cores 4 -> 5
ramdisk: remove noop,set ondemand
build.sh: linaro gcc 4.6
defconfig: bump version to 1.1
2013-01-22
rcu: remove fast nohz rcu
board-janice: improve mxt224-e sensitivity
ramdisk: disable cfq,ondemand
arm: disable mc scheduler
mali: os memory size 16mb -> 20mb (+4mb)
mali: l2 max cache cores 3 -> 4
2013-01-20
defconfig: u8500_CoCoE_defconfig
defconfig: kernel/ramdisk compression gzip -> lzop
drivers/samsung: merge param driver
drivers/samsung: merge j4fs driver
block: add bfq(v5r1) io scheduler
block: add row(v4) io scheduler
block: fix row compatibility
block: add sio io scheduler
block: add zen io scheduler
block:add vr io scheduler
mali: fix arch link
mali: disable mali state tracking
mali: max l2 reads 28kb -> 48kb
mm: slab -> slub
fs/aio: improve asynchronous io performance
cpuidle: deepest sleep state 3 -> 4
cpufreq: add pegasusq governor
sched: add nr_running symbol
sched: enable arch_power
arm: enable thumbee
arm/vfp: hardfloat+neon
net: enable advanced tcp configs
rcu: enable fast nohz rcu
board-janice: improve mxt224-e touchscreen sensitivity
bcm4330: screen off pm pm_max -> pm_fast
Plus de détails ici :
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
TAGS : kernel; custom; CWM; TWRP; JB; NFC
