Scumpi
Membre
- Inscrit
- 26 Septembre 2012
- Messages
- 25 689
- Points
- 48
- #1
Comment Installer le Kernel Custom Hybrid 1.0 Nightly Builds ?
Google Nexus 5
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Avertissement : Cette opération comporte des risques. Ni moi ni Phonandroid ne peuvent être tenu responsables des éventuels problèmes rencontrés. Pensez à effectuer une sauvegarde avant d'installer ce Kernel!
Merci à
===============================================================================================================================================S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Pré-requis
- Avoir déverrouiller son bootloader : voir tutoriel -->> Déverouiller le bootloader - Google Nexus 5
- Avoir installé un recovery Custom : voir tutoriel -->> Installer le TWRP 2.6.3.2 sur votre Google Nexus 5
- Assurez vous d'avoir une batterie chargée au maximum (mini 50%)
Caractéristiques & Changelog
L'objectif principal de ce kernel est de maximiser l'expérience utilisateur avec des optimisations !
Code:
S'il vous plaît,
Connexion
ou
S'inscrire
to view codes content!
Changelog
Hybrid_v1.0-[11-17]-[02-23]
* New Feature: Add Per-CPU Input Boost Frequency Control.
* New Feature: Add Per-CPU Governor Control.
* Improved GUI for CPU tab in Synapse
* Add control for tuning vibrator strength when using wake controls
* Tuned CPU Boost driver to use 500 ms input boost. This gives real good smoothness!!
You can change this to value as you like via Synapse.
[AOSP Power HAL gave 3 sec boost which is too much, non-configurable and hard on battery.
We had removed it long back.]
* CAF update and fixes for MSM BUS driver.
* ZRAM minor fix for potential crash. (from 3.18 upstream)
* Fix memory leak in video playback driver.
* Serial driver updates from upsteam. (not CAF)
Hybrid_v1.0-[11-12]-[09-24]
* New feature: MSM Limiter Driver can control min/max freq of ALL cores individually. Under testing. Please share your exp if tested.
* Complete file system sync with 3.4.y kernel. This includes lot of fixes by upstream.
* EXT4 misc fixes cherry-picked from Chaos kernel.
Hybrid_v1.0-[11-09]-[22-47]
* Added wake controls! (S2W/S2S/DT2W/PWR Key Suspend/Wake Timeout) -- Experimental - Let me know does these work good.
* CM12 compatibility. (until CM12 decides to take another turn again)
Hybrid_v1.0-[11-09]-[13-57]
* Awesome audio updates (Thanks to Steve's staging source and chaos source)
* Critical fixes and updates from 3.4.y
* Enabled support for USB serial drivers (3G cards)
* ARM updates and fixes
* Tuning for battery saving and more smoothness
* Lowered default temperature threshold by 5 degree.
* Added SIO, FIOPS, ZEN and VR I/O schedulers.
* Tuned ROW I/O scheduler
Hybrid_v1.0-[11-07]-[01-08]
* Fix Synapse broken controls for some AOSP compiled ROMs (You still need to install Superuser app separately, if you haven't already)
* Complete crypto, qseecom and security update from CAF. (Same as Chaos)
* Updated Bacon governor for performance.
* Minor update for CPU Boost driver.
* Misc missed updates which should be included in previous build.
Hybrid_v1.0-[11-04]-[23-30]
* Misc updates for timers and IRQ.
* CPUIdle complete backport from 3.16.
Hybrid_v1.0-[11-03]-[01-16]
* Minor correction in GPU freq steps. (perfect now)
* Complete MMC update from CAF. (same as Chaos)
* Complete kernel memory management update from CAF and 3.4.y. (virtual, swap, slab, slub, compaction etc)
* More updates for sound driver from CAF.
* Readded tuned LMK and OOM.
* DIAG complete update from CAF.
* Readded nvidia tegra patches for improved power efficiency.
* Fix broken Synapse control for hotplug
Hybrid_v1.0-[10-30]-[03-55]
* Readded CAF sound codec driver (which was removed for a test build)
* Default governor changed to Bacon which is OnePlus one interactive governor.
This governor offers lower timer_rate which helps a lot preventing any gliches in audio.
If we had kept mpdecision binary in place, min freq would have stayed higher most of the times and helped audio glitch BUT that's too much to sacrifice.
Let's give a shot to Bacon magic.
* Clean ups of misc updates.
* Add interactive governor for GPU. Pretty good.
Hybrid_v1.0-[10-28]-[23-11]
* Auto disable mpdecision to stop messing with minfreq.
* Clean sound control driver to improve compatibility with PowerAmp app.
* GPU OC and improvements. (Still it will boot at stock freqs)
* GPU controls for Synapse
* Various fixes from 3.4.y branch
* Misc updates from Chaos
* Add F2FS support (no auto mount due to some limitations in 5.0)
Hybrid_v1.0-[10-26]-[13-05]
* Initial version with core features and Synapse support!
* New Feature: Add Per-CPU Input Boost Frequency Control.
* New Feature: Add Per-CPU Governor Control.
* Improved GUI for CPU tab in Synapse
* Add control for tuning vibrator strength when using wake controls
* Tuned CPU Boost driver to use 500 ms input boost. This gives real good smoothness!!
You can change this to value as you like via Synapse.
[AOSP Power HAL gave 3 sec boost which is too much, non-configurable and hard on battery.
We had removed it long back.]
* CAF update and fixes for MSM BUS driver.
* ZRAM minor fix for potential crash. (from 3.18 upstream)
* Fix memory leak in video playback driver.
* Serial driver updates from upsteam. (not CAF)
Hybrid_v1.0-[11-12]-[09-24]
* New feature: MSM Limiter Driver can control min/max freq of ALL cores individually. Under testing. Please share your exp if tested.
* Complete file system sync with 3.4.y kernel. This includes lot of fixes by upstream.
* EXT4 misc fixes cherry-picked from Chaos kernel.
Hybrid_v1.0-[11-09]-[22-47]
* Added wake controls! (S2W/S2S/DT2W/PWR Key Suspend/Wake Timeout) -- Experimental - Let me know does these work good.
* CM12 compatibility. (until CM12 decides to take another turn again)
Hybrid_v1.0-[11-09]-[13-57]
* Awesome audio updates (Thanks to Steve's staging source and chaos source)
* Critical fixes and updates from 3.4.y
* Enabled support for USB serial drivers (3G cards)
* ARM updates and fixes
* Tuning for battery saving and more smoothness
* Lowered default temperature threshold by 5 degree.
* Added SIO, FIOPS, ZEN and VR I/O schedulers.
* Tuned ROW I/O scheduler
Hybrid_v1.0-[11-07]-[01-08]
* Fix Synapse broken controls for some AOSP compiled ROMs (You still need to install Superuser app separately, if you haven't already)
* Complete crypto, qseecom and security update from CAF. (Same as Chaos)
* Updated Bacon governor for performance.
* Minor update for CPU Boost driver.
* Misc missed updates which should be included in previous build.
Hybrid_v1.0-[11-04]-[23-30]
* Misc updates for timers and IRQ.
* CPUIdle complete backport from 3.16.
Hybrid_v1.0-[11-03]-[01-16]
* Minor correction in GPU freq steps. (perfect now)
* Complete MMC update from CAF. (same as Chaos)
* Complete kernel memory management update from CAF and 3.4.y. (virtual, swap, slab, slub, compaction etc)
* More updates for sound driver from CAF.
* Readded tuned LMK and OOM.
* DIAG complete update from CAF.
* Readded nvidia tegra patches for improved power efficiency.
* Fix broken Synapse control for hotplug
Hybrid_v1.0-[10-30]-[03-55]
* Readded CAF sound codec driver (which was removed for a test build)
* Default governor changed to Bacon which is OnePlus one interactive governor.
This governor offers lower timer_rate which helps a lot preventing any gliches in audio.
If we had kept mpdecision binary in place, min freq would have stayed higher most of the times and helped audio glitch BUT that's too much to sacrifice.
Let's give a shot to Bacon magic.
* Clean ups of misc updates.
* Add interactive governor for GPU. Pretty good.
Hybrid_v1.0-[10-28]-[23-11]
* Auto disable mpdecision to stop messing with minfreq.
* Clean sound control driver to improve compatibility with PowerAmp app.
* GPU OC and improvements. (Still it will boot at stock freqs)
* GPU controls for Synapse
* Various fixes from 3.4.y branch
* Misc updates from Chaos
* Add F2FS support (no auto mount due to some limitations in 5.0)
Hybrid_v1.0-[10-26]-[13-05]
* Initial version with core features and Synapse support!
Téléchargements
CM12/AOSP (Android 5.0):
-->
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Application pour configurer le kernel :
Installation
Connectez votre mobile à votre ordinateur.
- Copiez/collez le fichier .zip désiré à la racine de votre carte SD.
- Éteignez votre mobile.
- Redémarrez votre téléphone en mode recovery pour cela, appuyez simultanément sur les touches Volume bas et Power
- Vous êtes alors dans le bootloader : appuyez alors sur les touches de volume jusqu'à ce que Recovery soit affiché et appuyez sur le bouton Power pour accéder à celui-ci
- Commencez par faire une sauvegarde de votre rom actuelle en sélectionnant Backup & Restore puis Backup.
- Ensuite, sélectionnez install zip from sdcard dans le menu Recovery.
- Puis, sélectionnez Choose zip from sdcard.
- Choisissez le fichier .zip désiré et validez sur Yes.
- Enfin, sélectionnez Reboot System Now lorsque vous avez terminé
- Votre mobile va redémarrer. Soyez patient au premier redémarrage.
Offrez une bière au développeur en cliquant sur la bière smiley
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
Vos retours sont les bienvenus
