SkelettSkelter
Administrateur
- Inscrit
- 12 Mai 2013
- Messages
- 13 463
- Points
- 113
- #1
Un grand merci à
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
pour son kernel !Source :
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
(topic du kernel)=============================================================================================================================================
/!\ AVERTISSEMENT /!\ : Cette opération comporte des risques. Phonandroid et moi-même ne pouvons être tenus pour responsables des éventuels problèmes rencontrés !
=============================================================================================================================================
- Important: Manually disable battery optimisation for Boeffla-Config app in the rom settings (battery -> battery-optimisation)
- Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
- Full integration with Boeffla-Config V2 (you need at least version 2.5.10 or higher !!!) configuration app (get it from
- Dash charging fully supported
- The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
- Additional governors: zzmoove, blu_active, impulse, cultivation
- Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, maple, zen
- Underclocking CPU and GPU supported
- No CPU and GPU overclocking (not planned too)
- No CPU and GPU voltage interfaces (not planned too)
- GPU boost implemented (4 levels)
- CPU core profiles to restrict number of CPU cores being used (the OP5T does not hotplug based on load)
- USB charge rate bumped up to 900 mA
- Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
- Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
- Boeffla-Sound engine V1 (headphone volume control, earpiece control in calls, microphone gain control in calls)
- Dynamic FSync (activated if screen on, deactived if screen off), configurable
- Input boost frequencies and duration configurable per CPU cluster, input boost switch
- Show CPU frequency usage per CPU and frequency in Boeffla-Config
- Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
- Show GPU frequency usage per frequency in Boeffla-Config
- KCal V2 Color control
- Display backlight limits configurable (to avoid display brightness gets too low in some situations)
- Display backlight dimmer
- Swipe2wake gestures
- Boeffla generic wakelock blocker
- Control haptic feedback of gestures (except fingerprint)
- Haptic feedback intensity control (from 0 to 25, with 25 being 100%)
- Swipe2sleep gestures
- SD card read ahead buffer configurable (default increased to 1024 kB)
- Ext4 File system tweaks (default to on, can be disabled)
- Kernel logger (dmesg) configurable
- CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
- NFS read-only support (module)
- NTFS support (module)
- XBox support (module)
- OTG-Ethernet support (module)
- TCP Congestion changed to Westwood
- Many additional TCP congestion algorithms available
- Entropy values configurable
- Swap supported
- Wireguard supported
- Various kernel tweaks
- Doze mode configurable in Boeffla-Config
- Full selinux strict support (switchable to permissive on demand)
- Show speedbin information (PVS level) in Boeffla-Config app
- init.d support (in /system/etc/init.d - set correct permissions!)
- Automatic EFS backup
- Fully supports OOS device encryption, but does not force it
- Integrated full busybox 1.27.2 (own compilation)
- Compatible with systemless root
- Safetynet: verifiedbootstate + additional flags removed
- Kernel initialisation log file (with history of 3 log files)
- Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
- Google gcc 4.9 toolchain (64 bit) used for best stability
- Always based on latest OOS kernel sources (https://github.com/OnePlusOSS/androi...neplus_msm8998)
- Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
- Full integration with Boeffla-Config V2 (you need at least version 2.5.10 or higher !!!) configuration app (get it from
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
to configure all kernel settings- Dash charging fully supported
- The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
- Additional governors: zzmoove, blu_active, impulse, cultivation
- Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, maple, zen
- Underclocking CPU and GPU supported
- No CPU and GPU overclocking (not planned too)
- No CPU and GPU voltage interfaces (not planned too)
- GPU boost implemented (4 levels)
- CPU core profiles to restrict number of CPU cores being used (the OP5T does not hotplug based on load)
- USB charge rate bumped up to 900 mA
- Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
- Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
- Boeffla-Sound engine V1 (headphone volume control, earpiece control in calls, microphone gain control in calls)
- Dynamic FSync (activated if screen on, deactived if screen off), configurable
- Input boost frequencies and duration configurable per CPU cluster, input boost switch
- Show CPU frequency usage per CPU and frequency in Boeffla-Config
- Show current CPU core frequencies in realtime (note: other apps than Boeffla-Config will likely display wrong information on offline cores as they are not up-to-date yet)
- Show GPU frequency usage per frequency in Boeffla-Config
- KCal V2 Color control
- Display backlight limits configurable (to avoid display brightness gets too low in some situations)
- Display backlight dimmer
- Swipe2wake gestures
- Boeffla generic wakelock blocker
- Control haptic feedback of gestures (except fingerprint)
- Haptic feedback intensity control (from 0 to 25, with 25 being 100%)
- Swipe2sleep gestures
- SD card read ahead buffer configurable (default increased to 1024 kB)
- Ext4 File system tweaks (default to on, can be disabled)
- Kernel logger (dmesg) configurable
- CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
- NFS read-only support (module)
- NTFS support (module)
- XBox support (module)
- OTG-Ethernet support (module)
- TCP Congestion changed to Westwood
- Many additional TCP congestion algorithms available
- Entropy values configurable
- Swap supported
- Wireguard supported
- Various kernel tweaks
- Doze mode configurable in Boeffla-Config
- Full selinux strict support (switchable to permissive on demand)
- Show speedbin information (PVS level) in Boeffla-Config app
- init.d support (in /system/etc/init.d - set correct permissions!)
- Automatic EFS backup
- Fully supports OOS device encryption, but does not force it
- Integrated full busybox 1.27.2 (own compilation)
- Compatible with systemless root
- Safetynet: verifiedbootstate + additional flags removed
- Kernel initialisation log file (with history of 3 log files)
- Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
- Google gcc 4.9 toolchain (64 bit) used for best stability
- Always based on latest OOS kernel sources (https://github.com/OnePlusOSS/androi...neplus_msm8998)
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
.
- Avoir déverrouillé votre bootloader et installé le TWRP -->> Voir ici
- Avoir téléchargé le fichier suivant :
S'il vous plaît,
Connexion
ou
S'inscrire
pour voir le contenu ou les urls !
(Toujours prendre la dernière en date)
1. Copier/coller le fichier zip désiré que vous avez téléchargé dans la mémoire interne de votre téléphone.
2. Téléphone éteint, redémarrer en mode recovery
3. Dans le menu qui s'affiche, sélectionnez Back Up puis choisissez les partitions que vous voulez sauvegarder. Puis faites glisser votre doigt de la gauche vers la droite sur Swipe to Back Up pour commencer la sauvegarde
4. Revenez sur le menu principal, puis appuyez cette fois sur Install. Là, il ne vous reste plus qu'à choisir le fichier de la rom et glissez votre doigt sur Swipe to Confirm Flash pour lancer le flash
5. Swipez une nouvelle fois pour Wiper le Dalvik Cache et le Cache.
6. Une fois le flash terminé, faite un wipe Cache puis Reboot System Now
N'hésitez pas si vous avez des questions / précisions / corrections.
