[RÉSOLU]Mon huawei u8800 n'affiche que le logo huawei après un wipe data et error 6 et 7 a l'install

  • Auteur de la discussion edoloe
  • Date de début
E

edoloe

Membre
Inscrit
1 Septembre 2016
Messages
8
Points
0
  • #1
Salut!
Il y a de cella un Moi j'ai vu un astuce sur comment nettoyé les debris sur huawei u880 et je suivi. il consistaire à:
=>suprimé les reseaux sociaux,
=>quelque app unitile pré-installer et,
=>changer la recovery à CWM6.
Après la manipe tout marchaie sauf le mode de charge en off line (quand j'éteint et je branche le chargeur il se redemare seul et continue de charger allumé sur le home screen) mais il y a quelque jour j'ai voulu passe de la version 2.3.5 à une version 4.0.3 mais quand je suis aller sur cwm et proceder à un wipe data et essaiyé d'installé la zip j'ai un message error 7, donc j'ai essaiyé de redemarer et reconfigurer mais j'ai eu un message disant "setup wizzard stop work force close" j'ai essaiyé de redemarer et reprendre pendant 3 foir mais toujour le même message donc j'ai refaire un wipe data et redemarer et là me voilà avec le logo huawei qui redemare sans fin j'ai essaiyé d'autre rom mais toujour error 6 ou 7 même adb sideload ne marche pas les ordi ne trouve pas le phone.
A l'aide
 
Speedo4android

Speedo4android

Super VIP
Inscrit
3 Novembre 2014
Messages
2 568
Points
36
  • #2
Re: Mon huawei u8800 n'affiche que le logo huawei après un wipe data et error 6 et 7 a l'installatio

Hello,si tu n'as pas de sauvegarde , ca va etre tres compliqué , je regarde si je trouve qqchose sur xda ...
 
E

edoloe

Membre
Inscrit
1 Septembre 2016
Messages
8
Points
0
  • #3
Re: Mon huawei u8800 n'affiche que le logo huawei après un wipe data et error 6 et 7 a l'installatio

Jatan impaxiamen speedo
 
Speedo4android

Speedo4android

Super VIP
Inscrit
3 Novembre 2014
Messages
2 568
Points
36
  • #4
Re: Mon huawei u8800 n'affiche que le logo huawei après un wipe data et error 6 et 7 a l'installatio

edoloe a dit:
Jatan impaxiamen speedo
Hello, j'ai mis dans mes favoris / suivis, pour ne pas oublier, j'aurais du temps lundi .. À+
 
Speedo4android

Speedo4android

Super VIP
Inscrit
3 Novembre 2014
Messages
2 568
Points
36
  • #5
Re: Mon huawei u8800 n'affiche que le logo huawei après un wipe data et error 6 et 7 a l'installatio

Salut , j'ai pensé que celle ci pourrait te sortir d'affaire :
S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !

J'ai modifier le fichier updater-script pour eviter le problem d'erreur 7
Aurora_ICS_Light\META-INF\com\google\android\updater-script

l'original commence comme ca :
assert(getprop("ro.product.device") == "u8800" || getprop("ro.build.product") == "u8800" || getprop("ro.product.board") == "u8800");
show_progress(0.400000, 0);
c'est ce qui provoque l'erreur 7 si tu n'as pas le recovery marqué u8800

j'ai viré le check du modele "u8800" comme ceci :

ui_print("Updater Mod by Speedo @xda!");
ui_print("Install for "u8800");
show_progress(0.400000, 0);

je t'ai refait le .zip avec la mod; tu peut le telecharger ici :
S'il vous plaît, Connexion ou S'inscrire pour voir le contenu ou les urls !


Normalement il devrait passer (si tu as bien un u8800)...
Bonne chance :mrgreen:
 
E

edoloe

Membre
Inscrit
1 Septembre 2016
Messages
8
Points
0
  • #6
Re: Mon huawei u8800 n'affiche que le logo huawei après un wipe data et error 6 et 7 a l'installatio

salut speedo j'ai essaiyer et cella me donne error staut 6. stp aide mw
 
E

edoloe

Membre
Inscrit
1 Septembre 2016
Messages
8
Points
0
  • #7
Re: Mon huawei u8800 n'affiche que le logo huawei après un wipe data et error 6 et 7 a l'installatio

wow!!!! speed exkuz xa marche ka g vien de fai kelke modification dans le update script,
jai proceder comme suit:
vu ke tu avai mis 2 update script don update script et update script iro
jai suprimer le update-script-iro et jai fai kelke modification dans le update-script;
voici le tien;

ui_print("Updater Mod by Speedo @xda!");
ui_print("Install for "u8800");
show_progress(0.400000, 0);
format("ext4", "EMMC", "/dev/block/mmcblk0p12", "0");
mount("ext4", "EMMC", "/dev/block/mmcblk0p12", "/system");
mount("vfat", "EMMC", "/dev/block/mmcblk0p1", "/cust");
ui_print("Updating SYSTEM...");
show_progress(0.5, 20);
package_extract_dir("system", "/system");
symlink("/factory/hdcp.keys", "/system/vendor/firmware/hdcp.keys");
symlink("/persist/msm7630_qcom_wlan_nv.bin", "/system/etc/firmware/wlan/volans/WCN1314_qcom_wlan_nv.bin");
symlink("Roboto-Bold.ttf", "/system/fonts/DroidSans-Bold.ttf");
symlink("Roboto-Regular.ttf", "/system/fonts/DroidSans.ttf");
symlink("libwiperjni_v01.so", "/system/lib/libwiperjni.so");
symlink("mksh", "/system/bin/sh");
symlink("busybox", "/system/xbin/[", "/system/xbin/[[",
"/system/xbin/arp", "/system/xbin/ash", "/system/xbin/awk",
"/system/xbin/basename", "/system/xbin/bbconfig", "/system/xbin/brctl",
"/system/xbin/bunzip2", "/system/xbin/bzcat", "/system/xbin/bzip2",
"/system/xbin/cal", "/system/xbin/cat", "/system/xbin/catv",
"/system/xbin/chgrp", "/system/xbin/chmod", "/system/xbin/chown",
"/system/xbin/chroot", "/system/xbin/cksum", "/system/xbin/clear",
"/system/xbin/cmp", "/system/xbin/cp", "/system/xbin/cpio",
"/system/xbin/cut", "/system/xbin/date", "/system/xbin/dc",
"/system/xbin/dd", "/system/xbin/depmod", "/system/xbin/devmem",
"/system/xbin/df", "/system/xbin/diff", "/system/xbin/dirname",
"/system/xbin/dmesg", "/system/xbin/dnsd", "/system/xbin/dos2unix",
"/system/xbin/du", "/system/xbin/echo", "/system/xbin/ed",
"/system/xbin/egrep", "/system/xbin/env", "/system/xbin/expr",
"/system/xbin/false", "/system/xbin/fdisk", "/system/xbin/fgrep",
"/system/xbin/find", "/system/xbin/fold", "/system/xbin/free",
"/system/xbin/freeramdisk", "/system/xbin/fuser", "/system/xbin/getopt",
"/system/xbin/grep", "/system/xbin/gunzip", "/system/xbin/gzip",
"/system/xbin/head", "/system/xbin/hexdump", "/system/xbin/id",
"/system/xbin/ifconfig", "/system/xbin/insmod", "/system/xbin/install",
"/system/xbin/ip", "/system/xbin/kill", "/system/xbin/killall",
"/system/xbin/killall5", "/system/xbin/length", "/system/xbin/less",
"/system/xbin/ln", "/system/xbin/losetup", "/system/xbin/ls",
"/system/xbin/lsmod", "/system/xbin/lspci", "/system/xbin/lsusb",
"/system/xbin/lzop", "/system/xbin/lzopcat", "/system/xbin/md5sum",
"/system/xbin/mkdir", "/system/xbin/mke2fs", "/system/xbin/mkfifo",
"/system/xbin/mkfs.ext2", "/system/xbin/mknod", "/system/xbin/mkswap",
"/system/xbin/mktemp", "/system/xbin/modprobe", "/system/xbin/more",
"/system/xbin/mount", "/system/xbin/mountpoint", "/system/xbin/mv",
"/system/xbin/netstat", "/system/xbin/nice", "/system/xbin/nohup",
"/system/xbin/nslookup", "/system/xbin/ntpd", "/system/xbin/od",
"/system/xbin/patch", "/system/xbin/pgrep", "/system/xbin/pidof",
"/system/xbin/ping", "/system/xbin/pkill", "/system/xbin/printenv",
"/system/xbin/printf", "/system/xbin/ps", "/system/xbin/pwd",
"/system/xbin/rdev", "/system/xbin/readlink", "/system/xbin/realpath",
"/system/xbin/renice", "/system/xbin/reset", "/system/xbin/rm",
"/system/xbin/rmdir", "/system/xbin/rmmod", "/system/xbin/route",
"/system/xbin/run-parts", "/system/xbin/sed", "/system/xbin/seq",
"/system/xbin/setsid", "/system/xbin/sh", "/system/xbin/sha1sum",
"/system/xbin/sha256sum", "/system/xbin/sha512sum",
"/system/xbin/sleep", "/system/xbin/sort", "/system/xbin/split",
"/system/xbin/stat", "/system/xbin/strings", "/system/xbin/stty",
"/system/xbin/swapoff", "/system/xbin/swapon", "/system/xbin/sync",
"/system/xbin/sysctl", "/system/xbin/tac", "/system/xbin/tail",
"/system/xbin/tar", "/system/xbin/tee", "/system/xbin/telnet",
"/system/xbin/test", "/system/xbin/tftp", "/system/xbin/time",
"/system/xbin/top", "/system/xbin/touch", "/system/xbin/tr",
"/system/xbin/traceroute", "/system/xbin/true", "/system/xbin/tty",
"/system/xbin/tune2fs", "/system/xbin/umount", "/system/xbin/uname",
"/system/xbin/uniq", "/system/xbin/unix2dos", "/system/xbin/unlzop",
"/system/xbin/unzip", "/system/xbin/uptime", "/system/xbin/usleep",
"/system/xbin/uudecode", "/system/xbin/uuencode", "/system/xbin/vi",
"/system/xbin/watch", "/system/xbin/wc", "/system/xbin/wget",
"/system/xbin/which", "/system/xbin/whoami", "/system/xbin/xargs",
"/system/xbin/yes",
"/system/xbin/zcat");
symlink("toolbox", "/system/bin/cat", "/system/bin/chmod",
"/system/bin/chown", "/system/bin/cmp", "/system/bin/date",
"/system/bin/dd", "/system/bin/df", "/system/bin/dmesg",
"/system/bin/getevent", "/system/bin/getprop", "/system/bin/hd",
"/system/bin/id", "/system/bin/ifconfig", "/system/bin/iftop",
"/system/bin/insmod", "/system/bin/ioctl", "/system/bin/ionice",
"/system/bin/kill", "/system/bin/ln", "/system/bin/log",
"/system/bin/ls", "/system/bin/lsmod", "/system/bin/lsof",
"/system/bin/mkdir", "/system/bin/mount", "/system/bin/mv",
"/system/bin/nandread", "/system/bin/netstat",
"/system/bin/newfs_msdos", "/system/bin/notify", "/system/bin/printenv",
"/system/bin/ps", "/system/bin/r", "/system/bin/reboot",
"/system/bin/renice", "/system/bin/rm", "/system/bin/rmdir",
"/system/bin/rmmod", "/system/bin/route", "/system/bin/schedtop",
"/system/bin/sendevent", "/system/bin/setconsole",
"/system/bin/setprop", "/system/bin/sleep", "/system/bin/smd",
"/system/bin/start", "/system/bin/stop", "/system/bin/sync",
"/system/bin/top", "/system/bin/touch", "/system/bin/umount",
"/system/bin/uptime", "/system/bin/vmstat", "/system/bin/watchprops",
"/system/bin/wipe");
symlink("wiperiface_v01.so", "/system/bin/wiperiface");
set_perm_recursive(0, 0, 0755, 0644, "/system");
set_perm_recursive(0, 2000, 0755, 0755, "/system/bin");
set_perm(0, 1000, 04750, "/system/bin/diag_mdlog");
set_perm(0, 1000, 04750, "/system/bin/iptables");
set_perm(0, 3003, 02750, "/system/bin/netcfg");
set_perm(0, 3004, 02755, "/system/bin/ping");
set_perm(0, 2000, 06750, "/system/bin/run-as");
set_perm(0, 1000, 04750, "/system/bin/tc");
set_perm_recursive(1002, 1002, 0755, 0440, "/system/etc/bluetooth");
set_perm(0, 0, 0755, "/system/etc/bluetooth");
set_perm(1000, 1000, 0640, "/system/etc/bluetooth/auto_pairing.conf");
set_perm(3002, 3002, 0444, "/system/etc/bluetooth/blacklist.conf");
set_perm(1002, 1002, 0440, "/system/etc/dbus.conf");
set_perm(1014, 2000, 0550, "/system/etc/dhcpcd/dhcpcd-run-hooks");
set_perm(0, 2000, 0550, "/system/etc/init.goldfish.sh");
set_perm(1000, 1000, 0777, "/system/etc/init.qcom.sdio.sh");
set_perm(0, 0, 0544, "/system/etc/install-recovery.sh");
set_perm_recursive(0, 0, 0755, 0555, "/system/etc/ppp");
set_perm_recursive(0, 2000, 0755, 0644, "/system/vendor");
set_perm_recursive(0, 2000, 0755, 0755, "/system/xbin");
set_perm(0, 0, 06755, "/system/xbin/librank");
set_perm(0, 0, 06755, "/system/xbin/procmem");
set_perm(0, 0, 06755, "/system/xbin/procrank");
set_perm(0, 0, 06755, "/system/xbin/su");
set_perm(0, 0, 06755, "/system/xbin/tcpdump");
show_progress(0.200000, 0);
show_progress(0.200000, 10);
ui_print("Updating BOOT Image...");
package_extract_file("boot.img", "/cust/image/boot.img");
show_progress(0.1, 0);
unmount("/system");
unmount("/cust");
ui_print("Installation complete!");

et voici ma modification;
show_progress(0.400000, 0);
mount("ext4", "EMMC", "/dev/block/mmcblk0p12", "/system");
mount("vfat", "EMMC", "/dev/block/mmcblk0p1", "/cust");
ui_print("Updating SYSTEM...");
show_progress(0.5, 20);
package_extract_dir("system", "/system");
symlink("/factory/hdcp.keys", "/system/vendor/firmware/hdcp.keys");
symlink("/persist/msm7630_qcom_wlan_nv.bin", "/system/etc/firmware/wlan/volans/WCN1314_qcom_wlan_nv.bin");
symlink("Roboto-Bold.ttf", "/system/fonts/DroidSans-Bold.ttf");
symlink("Roboto-Regular.ttf", "/system/fonts/DroidSans.ttf");
symlink("libwiperjni_v01.so", "/system/lib/libwiperjni.so");
symlink("mksh", "/system/bin/sh");
symlink("busybox", "/system/xbin/[", "/system/xbin/[[",
"/system/xbin/arp", "/system/xbin/ash", "/system/xbin/awk",
"/system/xbin/basename", "/system/xbin/bbconfig", "/system/xbin/brctl",
"/system/xbin/bunzip2", "/system/xbin/bzcat", "/system/xbin/bzip2",
"/system/xbin/cal", "/system/xbin/cat", "/system/xbin/catv",
"/system/xbin/chgrp", "/system/xbin/chmod", "/system/xbin/chown",
"/system/xbin/chroot", "/system/xbin/cksum", "/system/xbin/clear",
"/system/xbin/cmp", "/system/xbin/cp", "/system/xbin/cpio",
"/system/xbin/cut", "/system/xbin/date", "/system/xbin/dc",
"/system/xbin/dd", "/system/xbin/depmod", "/system/xbin/devmem",
"/system/xbin/df", "/system/xbin/diff", "/system/xbin/dirname",
"/system/xbin/dmesg", "/system/xbin/dnsd", "/system/xbin/dos2unix",
"/system/xbin/du", "/system/xbin/echo", "/system/xbin/ed",
"/system/xbin/egrep", "/system/xbin/env", "/system/xbin/expr",
"/system/xbin/false", "/system/xbin/fdisk", "/system/xbin/fgrep",
"/system/xbin/find", "/system/xbin/fold", "/system/xbin/free",
"/system/xbin/freeramdisk", "/system/xbin/fuser", "/system/xbin/getopt",
"/system/xbin/grep", "/system/xbin/gunzip", "/system/xbin/gzip",
"/system/xbin/head", "/system/xbin/hexdump", "/system/xbin/id",
"/system/xbin/ifconfig", "/system/xbin/insmod", "/system/xbin/install",
"/system/xbin/ip", "/system/xbin/kill", "/system/xbin/killall",
"/system/xbin/killall5", "/system/xbin/length", "/system/xbin/less",
"/system/xbin/ln", "/system/xbin/losetup", "/system/xbin/ls",
"/system/xbin/lsmod", "/system/xbin/lspci", "/system/xbin/lsusb",
"/system/xbin/lzop", "/system/xbin/lzopcat", "/system/xbin/md5sum",
"/system/xbin/mkdir", "/system/xbin/mke2fs", "/system/xbin/mkfifo",
"/system/xbin/mkfs.ext2", "/system/xbin/mknod", "/system/xbin/mkswap",
"/system/xbin/mktemp", "/system/xbin/modprobe", "/system/xbin/more",
"/system/xbin/mount", "/system/xbin/mountpoint", "/system/xbin/mv",
"/system/xbin/netstat", "/system/xbin/nice", "/system/xbin/nohup",
"/system/xbin/nslookup", "/system/xbin/ntpd", "/system/xbin/od",
"/system/xbin/patch", "/system/xbin/pgrep", "/system/xbin/pidof",
"/system/xbin/ping", "/system/xbin/pkill", "/system/xbin/printenv",
"/system/xbin/printf", "/system/xbin/ps", "/system/xbin/pwd",
"/system/xbin/rdev", "/system/xbin/readlink", "/system/xbin/realpath",
"/system/xbin/renice", "/system/xbin/reset", "/system/xbin/rm",
"/system/xbin/rmdir", "/system/xbin/rmmod", "/system/xbin/route",
"/system/xbin/run-parts", "/system/xbin/sed", "/system/xbin/seq",
"/system/xbin/setsid", "/system/xbin/sh", "/system/xbin/sha1sum",
"/system/xbin/sha256sum", "/system/xbin/sha512sum",
"/system/xbin/sleep", "/system/xbin/sort", "/system/xbin/split",
"/system/xbin/stat", "/system/xbin/strings", "/system/xbin/stty",
"/system/xbin/swapoff", "/system/xbin/swapon", "/system/xbin/sync",
"/system/xbin/sysctl", "/system/xbin/tac", "/system/xbin/tail",
"/system/xbin/tar", "/system/xbin/tee", "/system/xbin/telnet",
"/system/xbin/test", "/system/xbin/tftp", "/system/xbin/time",
"/system/xbin/top", "/system/xbin/touch", "/system/xbin/tr",
"/system/xbin/traceroute", "/system/xbin/true", "/system/xbin/tty",
"/system/xbin/tune2fs", "/system/xbin/umount", "/system/xbin/uname",
"/system/xbin/uniq", "/system/xbin/unix2dos", "/system/xbin/unlzop",
"/system/xbin/unzip", "/system/xbin/uptime", "/system/xbin/usleep",
"/system/xbin/uudecode", "/system/xbin/uuencode", "/system/xbin/vi",
"/system/xbin/watch", "/system/xbin/wc", "/system/xbin/wget",
"/system/xbin/which", "/system/xbin/whoami", "/system/xbin/xargs",
"/system/xbin/yes",
"/system/xbin/zcat");
symlink("toolbox", "/system/bin/cat", "/system/bin/chmod",
"/system/bin/chown", "/system/bin/cmp", "/system/bin/date",
"/system/bin/dd", "/system/bin/df", "/system/bin/dmesg",
"/system/bin/getevent", "/system/bin/getprop", "/system/bin/hd",
"/system/bin/id", "/system/bin/ifconfig", "/system/bin/iftop",
"/system/bin/insmod", "/system/bin/ioctl", "/system/bin/ionice",
"/system/bin/kill", "/system/bin/ln", "/system/bin/log",
"/system/bin/ls", "/system/bin/lsmod", "/system/bin/lsof",
"/system/bin/mkdir", "/system/bin/mount", "/system/bin/mv",
"/system/bin/nandread", "/system/bin/netstat",
"/system/bin/newfs_msdos", "/system/bin/notify", "/system/bin/printenv",
"/system/bin/ps", "/system/bin/r", "/system/bin/reboot",
"/system/bin/renice", "/system/bin/rm", "/system/bin/rmdir",
"/system/bin/rmmod", "/system/bin/route", "/system/bin/schedtop",
"/system/bin/sendevent", "/system/bin/setconsole",
"/system/bin/setprop", "/system/bin/sleep", "/system/bin/smd",
"/system/bin/start", "/system/bin/stop", "/system/bin/sync",
"/system/bin/top", "/system/bin/touch", "/system/bin/umount",
"/system/bin/uptime", "/system/bin/vmstat", "/system/bin/watchprops",
"/system/bin/wipe");
symlink("wiperiface_v01.so", "/system/bin/wiperiface");
show_progress(0.200000, 0);
show_progress(0.200000, 10);
ui_print("Updating BOOT Image...");
package_extract_file("boot.img", "/cust/image/boot.img");
show_progress(0.1, 0);
unmount("/system");
unmount("/cust");
ui_print("Installation complete!");

comme tu peu le voi jai suprimer les set_perm et xa a marcher, mais di cella ne kozera til pa de problem?? ca je nariv plu a activer le wifi pou le bluetooth xa mache a meiveill.
merci pou ton aide et jatan ta reponxe
 
Speedo4android

Speedo4android

Super VIP
Inscrit
3 Novembre 2014
Messages
2 568
Points
36
  • #8
Re: Mon huawei u8800 n'affiche que le logo huawei après un wipe data et error 6 et 7 a l'installatio

Hello, donc 2 solutions:
1:tu reflash ma version sans rien changer.
2: tu fait un fix permission avec le recovery, ça marche pas toujours mais à essayer.
 
E

edoloe

Membre
Inscrit
1 Septembre 2016
Messages
8
Points
0
  • #9
Re: Mon huawei u8800 n'affiche que le logo huawei après un wipe data et error 6 et 7 a l'installatio

tou match je remercie pou ton aide
 
Speedo4android

Speedo4android

Super VIP
Inscrit
3 Novembre 2014
Messages
2 568
Points
36
  • #10
Re: Mon huawei u8800 n'affiche que le logo huawei après un wipe data et error 6 et 7 a l'installatio

Hello, avec plaisir [emoji1]
 

Sujets en relation

Haut Bas